Continuing Education

Continuing Education

YKK AP America Inc. is a Registered Provider with The American Institute of Architects Continuing Education Systems (AIA / CES). Credit(s) earned on completion of this program will be reported to AIA / CES for AIA members. Certificates of Completion for both AIA and non-AIA members are available upon request. They are all Intermediate Level HSW Classes. You can also view download a printable version of the flyer over to the right.

 

Proper Application of Storefronts, Window Walls and Curtain Walls

OA301R / 1.0 Hour / HSW – Yes

This is an introduction to structural engineering for components and cladding. ASCE 7 is the recognized standard for determining “Minimum Design Loads for Buildings and Other Structures” in the United States. This course defines and explores the building block information, including mullion loading, required to determine design pressures for your project. Past and current versions of ASCE 7 are compared and explained.

Ensuring Compliance with Today’s Energy Codes and Green Standards

ENERGCOM R2 / 1.0 Hour / HSW – Yes

The effort to improve the energy efficiency of buildings is primarily driven by energy codes and green standards. This course covers the latest in the ICC codes and ASHRAE standards. Through group discussion, the class will learn how to select vertical systems that meet these new requirements and whole building energy goals. It also reviews both frame and glazing performance and explains compliance methods for the commercial market such as AAMA 507 and NFRC Component Modeling Approach (CMA).

Fenestration and Glazing Considerations for School Safety

School Safety R1 / 1.0 Hour / HSW – Yes

This course explores design strategies for new schools to make the most effective use of glazing for daylighting, natural surveillance, safety and security by incorporating Crime Prevention Through Environmental Design (CPTED) guidelines. The importance of training faculty, students and staff will be stressed. Participants will learn how to select the optimal glazing for fenestrations locations throughout the school, and how to select locks and access controls from proven lockdown technologies.

WINDOWS FOR SCHOOLS AND COMMERCIAL BUILDINGS

YKK WFSCB / 1.0 Hour / HSW – Yes

School buildings will hold up much better if the correct products are selected. Selecting the best windows for a new or remodeled school requires a careful balance of aesthetics with a wide range of performance characteristics. Matching structural integrity to the location is essential and incorporating state of the art thermal advancements optimizes comfort and cost.

Curtain Wall Design

YKK 100 CW R2 / 1.0 Hour / HSW – Yes

Curtain Walls provide some of the most dramatic design details of a building. This course explains strengths and weaknesses of various types of curtain walls. Attendees will explore design pressure calculation, installation and glazing processes. A recent trend toward more fabrication and assemble in controlled environments will be analyzed. Latest energy codes will also be reviewed.

Structural Engineering with Components and Cladding

YKK S ENG R2 / 1.0 Hour / HSW – Yes

This is an introduction to structural engineering for components and cladding. ASCE 7 is the recognized standard for determining “Minimum Design Loads for Buildings and Other Structures” in the United States. This course defines and explores the building block information, including mullion loading, required to determine design pressures. Past and current versions of ASCE 7 are compared and explained.

Accessibility Standards for Fenestration

YKK 100 ACC R1 / 1.0 Hour / HSW – Yes

The fundamental philosophy of the International Building Code now is that everything is required to be accessible; only exceptions will be called out. Yet it can be confusing to distinguish between code requirements and requirements of the Americans with Disabilities Act (ADA) and the Fair Housing Act (FHA). This course will reconcile the three sets of requirements – IBC, ADA and FHA, as related to commercial fenestration.

Organic Finish or Anodized? Making the Right Choice

YKK 100 FIN R1 / 1.0 Hour / HSW – Yes

This course explains the types of Architectural Aluminum Finishes, it reviews the AAMA standards and evaluates the environmental impact pertaining to them. The course also differentiates their performance and explains their proper application and use.

7th Edition 2020 Florida Building Code with Components and Cladding

YKK 2020 FBC / 1.0 Hour / HSW – Yes

Jobs permitted after 2020 must comply with the new code. The focus of this course is to understand requirements and changes affecting vertical wall components and cladding. Most of the content is from Chapter 4 and Chapter 16 along with the Florida Energy Conservation Code. This course will help avoid pitfalls and make a smooth transition.

NoBODY wants to hear that! improving acoustical performance

YKK Acoustics / 1.0 Hour / HSW – Yes

Windows and doors are often the weak link when designing a building for protection from specific noise pollution. This course reviews the basics of sound transmission and the industry performance standards for measuring / testing sound transmission loss with components and cladding. The focus will then shift to specific design strategies to achieve the desired acoustical performance for a specific building.

TEXAS COASTAL CODES FOR GLAZED OPENINGS

YKK 2018 TDI / 1.0 Hour / HSW – Yes

The Texas Department of Insurance (TDI) adopted the 2018 International Building Code with an effective date of September 1, 2020. Their authority is limited to the Designated Catastrophe Area as defined by the Texas legislature. The focus of this course is to understand requirements and changes affecting glazed openings. ASCE 7 – 2016 will also be reviewed.

HURRICANE IMPACT RESISTANCE – COMPONENTS & CLADDINGS

YKK 100 Impact / 1.0 Hour / HSW – Yes

Testing and performance standards for hurricane impact and cyclic pressure testing were established in the mid 1990’s and have now been referenced in coastal building codes for over 20 years. This course will share examples of how buildings have fared under these performance standards and how to leverage this knowledge to make buildings safer.